工作說明 1. 機台保養維護 (離子植入機 / 高溫爐管 / RTP )，維持設備正常運作。 2. 分析機台設備異常的原因，並排除問題。 3. 提出潛在設備問題，提出預防措施。 4. 重大機況問題處理改善報告說明。 5. 成本 Cost down (2nd source評估 / DIY....) 教育程度 大學 碩士
工作說明 1.Maintain and improve Quality System (IATF 16949, ISO 9001) 2.Maintain and improv Hazardous Substance Management System 3.Maintain and improv Common Criteria 4.Coordinate RBA audit 5.Audit - System certification audit / Customer audit / Internal audit 6.Coordinate Customer spec review and implementation 7.Hanlde Customer questionnaire 8.Hanlde Customer satisfaction survey 9.Coordinate TQM activities including Quality Training/ FMEA / QIT / QCC
工作說明 1.閱讀與撰寫數位 IP 規格書。 2.依據規格以 Verilog 設計數位 IP，並以 C 撰寫驗證程式完成功能驗證。 3.與韌體工程師合作，於 FPGA 平台驗證數位 IP 功能。 4.與 DV 工程師合作，於 UVM 環境進行數位 IP 功能驗證。 5.與韌體工程師及應用工程師合作，於實際 IC 上複驗 IP 功能。 6.負責將 IP 整合至晶片（Integration）—可選。 7.進行 FPGA 編譯與合成，建立可用於驗證的 FPGA 環境—可選。 8.進行 IC 邏輯合成與時序分析，完成 IC 後段流程—可選。 9.產出 IC 量產測試程式，並與測試工程師合作完成量產導入 教育程度 大學 碩士 擅長工具 1.具備計算機架構相關知識 2.熟悉 AXI、AHB、APB 等匯流排協議 3.具備將 IP 整合至系統的實務經驗 4.具備合成與時序分析的經驗 5.具備IC量產經驗 所需之相關證照 1. 具IP開發及維持, IC整合經驗 2. 有以下開發經驗尤佳:PWM controller, ADC controller, FLASH memory controller, 晶片整合 3. 擅長數位IC設計環境及工具:Verilog/Verdi/NCVerilog/VCS/DC/PT/FPGA/SPYGLASS 工作技能 1.具備良好的邏輯推理能力 2.具備良好溝通能力 3.具備電子與電路相關基礎知識 4.具備 Verilog 撰寫能力 5.熟悉數位 IC 設計方法與整體流程
【工作內容】 1. 高低壓電力系統、空調系統、無塵室系統、有機溶劑排氣系統、VOC處理系統運轉與維護； 2. 上述設備日常維修與保養規劃； 3. 上述系統改善與工程規劃； 4. 工程發包及執行； 5. 定時巡檢抄表作業； 6. 主管交辦事項 其他條件: 1. 須配合輪班(三班制)； 2.假日需配合加班(二班制)； 3. 具半導體廠或光電廠相關經驗尤佳 #LI-CC1
工作說明 ■ 生產計劃與執行 ■ 生產效率報表分析與對策檢討 ■ 生產線人員績效管理、調配及掌控機台產能 ■ 生產管理、排程規劃 ■ 專案管理 教育程度 大學 碩士 擅長工具 ■ 擅長工具 • Excel巨集／VBA等程式運用 • PowerPoint運用（有Power BI技能為佳） ■ 工作技能 • 生產管理 • 品質管理 • 人因工程 • 作業流程改善 • 能分析生產報表，消除瓶頸機台達成產能及出貨目標 ■ 其他 • 生產線主任為三班制工作。（日夜輪調頻率約1-2年輪調一次） • 積極／樂觀，喜歡與人相處。（因業務需要經常對外溝通協調） • 具抗壓性。（因本職務為管理職，基層主管之業務繁瑣，偶爾須超時工作） • 企圖心強。（因主任須管理每班約80位部屬，須具備各種管理概念與技能） 以上條件具備後，公司將提供寬廣學習平台與成長環境，歡迎與我們一同創造美好前程。 工作經驗 1-3 年 3-5 年 5-10 年 其他 日班 晚班 大夜班 假日班
工作說明 (1) 產品製程故障分析 (2) 優化製程, 提升良率 (3) 降低成本 (4) 需使用統計製程管制分析 (5) 專案管理 #LI-CC1
工作說明 (1) 產品製程故障分析 (2) 優化製程, 提升良率 (3) 降低成本 (4) 需使用統計製程管制分析 (5) 專案管理 #LI-CC1
工作說明 1.WAT 電性維護與除錯 2.WAT 與 QC 異常產品分析 3.產品低良率分析 4.建立WAT測試程式及 設計測試layout pattern 5.衍生製程或新製程開發 6.新產品tapeout, 光罩E-JDV 檢驗 7.熟悉元件量測及量測機台操作 8.量產製程改善及優化 9.製程整合技術文件的維護與修訂 10.新產品導入、規格與設計規則的確認、編寫WAT電性量測程式 11.負責製程開發所需之技術模組發展工作 12.執行產品品質改善 DOE 實驗分析工作 13.確認產品布局設計與比對布局準則 #LI-CC1
工作說明 1. 負責BG人力招募、新進離職作業 2. 招募管道開發、人才招募、甄選與任用作業 3. 招募任用及面試評核作業 4. 組織人事異動作業 5. 外籍移工招聘及管理 6. HR數位化分析與流程優化 7. 其他專案執行與主管交辦事項
工作說明 Audio related product IC design 1.Audio product IC development 2.In charge of fully design flow, from RTL coding to physical implementation 3.Digital filter IP design, from algorithm development to RTL design, ex. delta-sigma modulation, interpolation filter or decimation filter 教育程度 碩士 擅長工具 verilog, nlint, design compiler 工作技能 RTL coding, logic simulation, timing analysis
工作說明 Job Summary This is a position for an embedded software engineer (leaning toward FAE) based in Taiwan, responsible for technical support primarily for customers in China and Taiwan for the Nuvoton Bridge-IC products that is SoC incorporating ARM CPUs. You will work on the bridge-IC platforms that include various interfaces such as USB and DisplayPort, MIPI, as well as image and audio processing functions, and provide technical support for customer product development, evaluation, and mass-production ramp-up through software modifications according to customer requirements and assistance with customer software development. Main duties (Responsibilities) FAE duties for customers in Chinese-speaking regions •Technical support services for customers in Taiwan and China a.Responding to technical inquiries related to embedded software b.Analyzing issues, isolating causes, and providing resolution support during customer software development •Hearing customer requirements, organizing technical requirements, and proposing implementation methods •Participating in technical meetings with customers (in-person/online), providing technical explanations and coordination •Ongoing technical support during customer product evaluation and mass production ramp-up phases Modifying embedded software and providing technical fixes •Modification and adjustment of software for the bridge-IC based on customer requirements a.Device drivers, middleware, reference software •Operation verification and debugging of functions related to USB, DisplayPort, image processing, and audio processing •Bug reproduction testing and verification using evaluation boards and customer systems Collaboration within and outside the company •Feedback to internal development teams on technical issues and defects reported by customers •Organizing workarounds, limitations, and recommended settings •Creation and updating of technical documents, FAQs, and application notes for customers •Technical customer support and proposal assistance in collaboration with the HW and Sales departments 教育程度 大學 碩士 擅長工具 C, C++, 工作技能 Required Qualifications 1.Experience in embedded software development using C/C++ 2.Experience using ARM-based SoCs or microcontrollers 3.Development and debugging experience in embedded Linux or RTOS environments 4.Practical experience in software bug analysis and root cause investigation 5.Ability to communicate technically with customers 6.Resides in Taiwan / able to work in Taiwan Preferred Qualifications 1.Experience as a semiconductor FAE, application engineer, or technical support 2.Ability to provide technical support in Chinese (Traditional/Mandarin) 3.Experience dealing with ODM/OEM customers in China and Taiwan 4.Knowledge of high-speed interfaces such as USB, DisplayPort, HDMI, MIPI, etc. 5.Knowledge and experience related to image processing (ISP, Video Codec) and audio processing 6.Experience in development or validation of AR/XR devices or similar products Desired Characteristics 1.Someone who can accurately understand customers' technical issues and propose practical solutions 2.Someone who can coordinate and explain as a bridge between the development team and customers 3.Someone who can flexibly respond to the fast-paced development style of Greater China customers 4.Someone who wants to contribute to the success of customer products through technical support
工作說明 SoC Hardware Engineer (FAE-Oriented) 【Job Summary】 This position is a Field Application Engineer (FAE)–oriented hardware engineer role supporting the Nuvoton bridge-IC, which is ARM CPU–based SoC products. Based in Taiwan, the engineer will primarily support customers in Taiwan and China by providing technical assistance for the bridge-IC based systems that include high-speed interfaces such as USB, DisplayPort, and MIPI, as well as image and audio processing functionality. The role focuses on schematic and PCB layout reviews, design recommendations, and on-site debugging when issues occur, supporting customers throughout product development, evaluation, and mass production ramp-up. As the bridge-IC products include embedded software, a basic level of software knowledge is required to perform hardware/software issue isolation. 【Key Responsibilities】 1.Customer-Facing FAE Activities (Hardware-Focused) •Provide technical support to customers in Taiwan and China •Support customer system designs using the bridge-IC products •Participate in technical meetings with customers (on-site or online) for design consultation and issue resolution 2.Schematic and PCB Layout Review •Review customer circuit schematics Power supply design, clocking, reset, and peripheral interface connections •Review PCB layouts High-speed signal routing checks for USB, DisplayPort, MIPI, etc. Provide recommendations from the viewpoints of signal integrity (SI), power integrity (PI), grounding, and noise reduction •Propose design improvements and corrective actions based on hardware design guidelines 3.Issue Analysis and On-Site Debugging •Analyze root causes of issues occurring in customer systems •Perform validation and reproduction testing using evaluation boards and customer boards •Conduct hardware debugging using oscilloscopes, logic analyzers, and related equipment •Perform hardware/software issue separation when necessary Software-level checks such as log review and configuration confirmation 4.Internal Collaboration and Knowledge Sharing •Report customer issues and requests to internal design and development teams •Organize workarounds, limitations, and recommended circuit implementations •Create and update customer-facing hardware design guides, FAQs, and application notes •Collaborate with sales teams to provide technical support for customer engagements 教育程度 大學 碩士 工作技能 C, C++, 其他 Required Qualifications 1.Experience in circuit design or hardware technical support using SoCs or high-performance processors 2.Fundamental knowledge of digital circuits and power supply design 3.Practical experience in schematic and PCB layout review 4.Basic knowledge of high-speed interfaces such as USB, DisplayPort, and MIPI 5.Experience in hardware issue analysis and debugging 6.Basic knowledge of embedded software sufficient for HW/SW issue isolation (e.g., checking logs and understanding configuration settings) 7.Residing in Taiwan or able to work in Taiwan Preferred Qualifications 1.Experience as a semiconductor FAE or application engineer supporting customers 2.Experience with ARM-based SoC product design, evaluation, or support 3.Knowledge of image processing (ISP, camera interfaces) and audio processing (audio codecs) 4.Experience with SI/PI analysis and EMI/EMC countermeasures 5.Ability to communicate technically in Chinese (Mandarin / Traditional Chinese) 6.Experience supporting ODM/OEM customers in Taiwan or China 7.Experience in development or validation of AR/XR devices or similar products Desired Characteristics 1.Able to understand customer design intentions and provide practical improvement proposals 2.Proactive and positive attitude toward on-site troubleshooting and debugging 3.Primarily hardware-focused, but able to analyze issues from a system-level perspective including software 4.Capable of acting as a bridge between customers and internal development teams 5.Flexible and responsive to the fast-paced development style common among greater China customers Position Highlights 1.Taiwan-based local hire position 2.Hardware-focused FAE role supporting customers in Taiwan and China 3.Core responsibilities include design review and on-site debugging 4.Opportunities to work with ARM SoCs, image/audio processing, and high-speed interfaces 5.System-level technical support role combining both hardware and software perspectives
工作說明 Do chip or block level design verification of a MCU system a.Build Verification environment with DV language (eg. System Verilog, UVM etc) b.Create assertion properties (eg. OVL, SVA etc) c.Improve code or functional coverage d.Behavioral modeling of a digital or analog IP e.Formal verification (ABV) f.Lead a test case and build the test plan g.Improve or build up DV automation flow
工作說明 Do chip or block level design verification of a MCU system a.Build Verification environment with DV language (eg. System Verilog, UVM etc) b.Create assertion properties (eg. OVL, SVA etc) c.Improve code or functional coverage d.Behavioral modeling of a digital or analog IP e.Formal verification (ABV) f.Lead a test case and build the test plan g.Improve or build up DV automation flow #LI-SONIA 教育程度 碩士 工作經驗 3-5 年 5-10 年 工作技能 1. 最少會以下2種工具 : NCSIM, NCVerilog, IRUN, VCS, Verdi 2. 會以下工具者佳 : VCF or JasperGo, SPECMAN, Palladium
工作說明 1. 市場趨勢分析及市場策略 2. 規劃MCU產品計畫 3. 跨團隊協調資源並執行計畫 教育程度 大學 碩士 工作技能 1. 研究所以上，電子電機計算機相關領域尤佳 2. 至少3年以上在IC晶片公司的專案管理，產品行銷企劃相關工作經驗，MCU相關領域尤佳 3 熟悉市場營銷流程和方法，市場觀察力與洞察力，能夠進行市場調研和分析 4. 具備良好的溝通協調能力和團隊合作精神 5. 能夠獨立思考和解決問題，具備良好的創意思維和實踐能力 6. 流利英文，日文韓文加分 7. 需配合出差
工作說明 1.懂MCU架構，熟悉C-語言程式設計開發流程者, 支援客戶應用的MCU開發以及驗證 2.開發電競周邊產品的MCU功能，含燈效控制和彩色TFT LCD顯示。 3.具emWin GUI 設計& Zephyr RTOS 韌體開發經驗者佳。 4.可用英文對客戶技術支持和溝通者佳 教育程度 大學 碩士 擅長工具 C++, LabVIEW, OrCAD, 工作技能 1. 懂MCU架構，熟悉設計開發流程者佳 2. 具備良好的溝通協調能力 3. 懂 Keil C51 / Keil MDK / OrCAD / Labview / C++ 佳 4. 有 RF and Bluetooth 經驗尤佳 5. 有電源設計，BMS, UPS,相關感測器應用，家電系統，觸控家電經驗者 尤佳 6. 5年以上有電源設計，BMS, UPS,相關感測器應用，家電系統經驗尤佳
工作說明 1.提供客戶技術支援, 設計建議, 問題分析 2.提供產品應用技術支援, 產品應用設計建議, 韌體/軟體問題分析 教育程度 大學 碩士 擅長工具 C, C++, 工作技能 1.需具備2年以上 FW 相關經驗 2.擅長邏輯分析儀Logic Analyzer, 示波器Scope 3.熟悉組合語言 & C語言
工作說明 •Design high-speed/RF analog circuits for wireless/wired communication systems. •Characterize high-speed/RF transceiver and building blocks. •Work with closely with communication algorithm/digital design team for system design and performance optimization. LI#Ting 工作技能 基礎類比電路 類比IC電路設計 其他 1. MS or PhD degree in EE or equivalent. 2. Hands-on transceiver building block design experience is preferred (e.g., LNA, mixer, PA, analog filter, PLL) 3. EM tool experience is a plus.
工作說明 Responsibilities
工作說明 1. Develop BSP for BMC SOC(bootloader, Linux kernel driver, openbmc, yocto) 2. Develop SW stack of applications 3. Develop application prototypes involving SOC and MCU 4. Service customer's requests and on-site support. 教育程度 大學 碩士 擅長工具 C, C++, Java, Python, 工作技能 1. Over 2 years of experience on developing Linux drivers and applications. 2. Fluent English conversation skill 3. Experience on Cortex-M MCU family FW coding and network application coding are plus.
上刊登職缺 
